Setting the Bar for Extreme Axles
Your Pro XP puts out a ton of power, and when you put the pedal down, you’ll send your axle temps sky high. If you’re a little off camber, those temps can lead to catastrophic axle failure fast. That’s where Assault Industries' MAS-223 Phoenix Axle comes in. They’re as tough as they come, and their proprietary high-temp grease can handle insane heat fluctuations without breaking down.
Industry-Leading High-Temp Performance
Assault’s high-temp boot grease is more important than you think. That’s because running at high speeds or high articulation angles causes tons of friction and heat buildup. Your stock grease can’t handle the heat and will break down in these conditions. This can lead to boot failure, CV failure, and catastrophic axle failure. Sand racers, rock crawlers, and trail riders can experience poor performance or busted axles from running normal axle grease. Phoenix Axles use high temp grease that doesn’t break down even when it gets hotter than hell.
Lab-Proven Performance
How good is a Phoenix Axle’s grease? It maxed out the test equipment at 586.5°F without breaking down, and OEM grease started breaking down at 365°F. So keep the needle pinned if you’re running Phoenix Axles—that’s what they’re made for.
Bigger CVs for Higher Articulation
Phoenix Axles are built with bigger CV joints so they can reach higher articulation angles without overheating. So run lifts and offset A-arms at full throttle on your RZR Pro XP without worrying about overheating. These axles are perfect for when your suspension drops through technical rock gardens too.
A Bigger Shaft for Extreme Strength
A premium Pro XP axle wouldn’t be premium if it didn’t increase the axle shaft size too. The bigger shaft and end-to-end chromoly construction ensure that it can survive heavy torque loads and low-talent moments that would wreck other axles.
Your Pro XP puts out a ton of power, and when you put the pedal down, you’ll send your axle temps sky high. If you’re a little off camber, those temps can lead to catastrophic axle failure fast. That’s where Assault Industries' MAS-223 Phoenix Axle comes in. They’re as tough as they come, and their proprietary high-temp grease can handle insane heat fluctuations without breaking down.
- Proprietary high-temp grease blend for unmatched performance
- Incredibly high CV angles
- 4340 chromoly steel construction
- Increased shaft size
Industry-Leading High-Temp Performance
Assault’s high-temp boot grease is more important than you think. That’s because running at high speeds or high articulation angles causes tons of friction and heat buildup. Your stock grease can’t handle the heat and will break down in these conditions. This can lead to boot failure, CV failure, and catastrophic axle failure. Sand racers, rock crawlers, and trail riders can experience poor performance or busted axles from running normal axle grease. Phoenix Axles use high temp grease that doesn’t break down even when it gets hotter than hell.
Lab-Proven Performance
How good is a Phoenix Axle’s grease? It maxed out the test equipment at 586.5°F without breaking down, and OEM grease started breaking down at 365°F. So keep the needle pinned if you’re running Phoenix Axles—that’s what they’re made for.
Bigger CVs for Higher Articulation
Phoenix Axles are built with bigger CV joints so they can reach higher articulation angles without overheating. So run lifts and offset A-arms at full throttle on your RZR Pro XP without worrying about overheating. These axles are perfect for when your suspension drops through technical rock gardens too.
A Bigger Shaft for Extreme Strength
A premium Pro XP axle wouldn’t be premium if it didn’t increase the axle shaft size too. The bigger shaft and end-to-end chromoly construction ensure that it can survive heavy torque loads and low-talent moments that would wreck other axles.
FEAUTRES:
- Proprietary high-temp grease blend perfect for aggressive riding
- Reduced friction prevents heat buildup
- Grease is virtually waterproof
- High pressure tolerance for extreme rides
- Resists temperatures greater than 586.4°F (308°C)
- Heat-treated 4340 chromoly steel axle shafts
- Operates at high CV angles
- Field and lab tested for extreme strength and endurance
- 3-year warranty
FITMENT:
- Polaris RZR PRO XP : 2020+
- Polaris RZR PRO XP 4 : 2020+
Replaces OEM Part #: 1334388, 1334389, 1336922, 2208421
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
3-YEAR WARRANTY
TERMS OF WARRANTY
Assault Industries offers premium products and extends one of the industry's best warranties to go with them. Each MAS-223 Phoenix Axle (excluding boot) carries a 3 Year warranty against manufacturing defects to the original purchaser, for the period and subject to the terms stated on our Warranty Policy page.
For complete warranty details see our Warranty Policy page. TERMS OF WARRANTY
Assault Industries MAS-223 Phoenix Axles (excluding boots) are warrantied to the original purchaser for a period of 3 years from the date of purchase. If the axle fails within 3 years from the date of purchase, Assault Industries will ship a replacement axle for a flat fee of $100. The axle may be replaced as many times as needed during the original warranty period. Damage resulting from lack of maintenance such as, but not limited to, running for an extended period of time with a damaged boot and/or no grease.
Phoenix axles used with non-SuperATV lift kits are not warrantied against spline damage, due to variation of suspension travel in other manufacturers lift kits. In all warranty cases, the purchaser must provide Assault Industries with proof of purchase and proof of breakage.
